Center for Molecular Spectroscopy and Dynamics

Specifications

1.  Hermetically Sealed Module (One Workstation) : 1 set
     Single sided and Single(2 port) length: 1,200(L) X 890(H) X 760mm(D)
     Modular structure with elastomer gasket front panel.
     Material : 304 Stainless Steel, Main body : 3 mm thick.
     Side end panel : 4mm thick, 3 micron filter : 2 ea
     Fluorescent Skylight, 9" Glove Port (M/C) : 2 ea., Butyl Rubber Glove (8" dia.) : 1 pair
     Window :Scratch & High impact resistant, Optically clear polycarbonate
     Electrical Outlet : Two duplex (110V, 220V), Glove Port cover : Protect atmosphere during

     glove replacement
     Service port feedthru : On request
     Leakage Certification : No detectable leak at ±8" W.C with helium spectrometer calibrated

2.  Antechamber : 1 set
     This chamber will be installed right and left side of glove box.
     Size : 380 dia. x 500 mm length, High vacuum design, O-ring sealed.
     Vacuum capacity : 1 x 10-3 torr, Doors, vertical action.
     Vacuum gauge : Bourdon tube dial type.
     Connection : 3/8" backfill ball valve.
     Leakage Certification : No detectable leaks at full vacuum with helium mass spectrometer

     calibrated.

3.  Mini Antechamber : 1 set
     This chamber will be installed right and left side of glove box.
     150mm (dia.) x 290mm (Length), Doors : Single center clamped, O-ring.
     Gauge : Broudon tube dial type, Vacuum capacity : 1 x 10-3 torr.

4.  Automatic Pressure Controller (Color Touch Panel) : 1 set
     ─5" to 5" W.C., Limits easily adjustable.
     Read pressure and set limits. Manual foot switch operate whether automatic control is on

     or off.
     Two solenoid valves are operated. Gas pressure : 10 psi to 30 psi, approximately 25 psi

     suggested
     1 set of Vacuum Pump : 200L/min...Intake Type : NW25. Ultimate pressure : 5 x 10-4 torr.

    Two Stage, Power 220V, 1 Phase.

5.  Dri Trap (Purification System) : 1 set

6.  Support Stand

7.  Moisture Analyzer : 1 set
     Model: DMT152
     Type: Thin-Film capacitive polymer sensor

8.  Oxygen Analyzer : 1 set
     Model: LD-450-C(Converter), SD40NW(Sensor Unit)

9.  Solvent Trap : 1 set
     Chemical Filter.

      -  Link : http://koreakiyon.co.kr/

Usage / Application

-  Store reactive materials

-  Do experiment under inert atmosphere